Stihl TS 500i - Page 76

75TS 500i
: Unlock the control panel (1) on
the wide tab (arrow) and remove
it
: Pull the control panel (1) with the
leads out of the opening (arrow)
and examine it, replace if
necessary
Installation
Use the wiring tool 5910 890 4000
to press the leads completely into
the guides, b 1.1.
: Guide the leads into the opening
(arrow) and carefully fit the
control panel (1)
1307RA313 TG
1
1307RA314 TG
1
1307RA315 TG
1
: Press in the control panel (1)
until the wide tab (2) engages
– narrow tab (arrow) engages in
the opening
: Hook the green and yellow
lead into the guides (arrows)
– green lead underneath yellow
lead
: Place the green and yellow
lead into the guides (arrows)
– yellow lead underneath green
lead
1307RA316 TG
2
1
1307RA312 TG1307RA317 TG
: Connect the yellow leads (1) and
green leads (2) completely
: Press the plug connection (1) of
the yellow lead into the guide
(arrow)
: Press the yellow lead (1) into
the guides (arrows)
– the yellow lead must be placed
underneath the green lead
1307RA300 TG
1
1
2
2
1307RA301 TG
1
1307RA302 TG
1