Special equipment 7
Battery on a roller channel
1 Knurled-head screw
2Batterylock
3 Rubber buffer
Battery on a roller channel
Description
The battery rests on roller channels and can
be installed and removed from the side of
the truck using a battery change frame*. The
battery is secured with clamping devices on
both sides and held in position in this way.
Monitoring
The battery locks are electrically monitored. If
one of the locks is not correctly locked in place
an error message appears in the display and
the truck will stop.
WARNING
Every time before starting work the battery locks (2)
must be checked for perfect condition and function.
*Option
523
1 804 2502 EN - 11/2017 109
To Next Page
Loading...
