2 Safety
Risk assessment
Risk assessment
Within the scope of validity of the CE guide-
lines, the operating company must create
operating instructions on the basis of a risk
assessment. The purpose of the risk assess-
ment is to identify dangers and the associated
risks that could occur due to the product or
the application of the product in the specific
place of use and under the application condi-
tions at this place of use. We can help you to
complete the risk assessment. The operating
instructions are intended to warn against the
identified dangers and provide information on
possible remedial actions.
We recommend integrating these operating
instructions into the operating procedures for
the specific place of use.
Residual risks
Despite observation of all pertinent safety
regulations for the design and construction
of our trucks and despite proper use by the
operating company, residual risks can occur
during operation. We refer to this specifically
in the individual chapters.
Please heed all provid
ed safety warnings.
Regular testing
This industrial truc
k must be checked at least
once a year by a specia
list (expert) according
to our specifications
.
Our test instructions summarise all activities
that must be performed for the purposes of
detecting damage or defects that have an
effect on safety. The requirements pursuant
to FEM 4.004 are included in these test
instructions.
A written report about the inspection has to be
created.
Please check whether re
gular safety inspec-
tions of the truck by an
authorized expert are a
legal requirement in the
country this truck will
16 5
231 804 2502 EN - 11/2017
To Next Page
Loading...
Need help?
General
