4 Operation
General commissioning
separately to the industrial truck, check the
following:
• The nominal voltage
• The minimum required weight
• The model and design of the battery male
connector fitted
• The minimum required cross-section and
the connection type of the battery cable
CAUTION
Risk of damage to property
Observe the information and guidelines from the
battery manufacturer.
Permitted batteries
Only batteries with trays constructed in
accordance with EN1175-1 may be used for
operation of the industrial trucks.
Battery commissioning
Proper commissioning must be performed
if the industrial truck was ordered without
a battery or if it was supplied with a dry
pre-charged battery because it had to be
transported over a long distance (e.g. from
overseas). Observe the information and
guidelines from the battery manufacturer. If
the battery was obtained separately to the
industrial truck, the nominal voltage, the
required minimum weight and the attached
battery male connector must be checked
particularly carefully.
WARNING
Observe the safety r
egulations for handling battery
acid.
CAUTION
Risk of short circuits
Take care not to jam or crush the battery cable.
52 5
231 804 2502 EN - 11/2017
To Next Page
Loading...
Need help?
General
