7 Special equipment
Two-person cab
WThe telescopic table has a high stability due
to it being maintenance-free and having very
large guide rollers and side cable guides. The
toptableisdriventothemiddletablevia2
chains.
The telescopic table is a precise machine part.
The following information must therefore be
considered:
• Do not subject to extreme atm
ospheric
conditions
• The inspection and maintenance intervals
are shortened in volatile and very damp
environments.
• Do not subject to shear forces, e.g. shifting
of the load with the fork profile extended in a
longitudinal and lateral direction.
Maintenance of the telescopic table
NOTE
The information in the enclosed manufactu-
rer's documents must be observed to ensure
proper maintenance of the telescopic table.
Two-person cab
If a driver's cab is equipped appropriately, two
people may be inside at the same time during
normal operation. The additional equipment
usually consists of:
• Key switch to switch from one-person
operation to two-person operation
• Handholds
• Additional foot switches
• Lift ram protection against contact
• Protection aga
inst leaning out
• Other safety equipment may be available,
depending on the job.
114
5231 804 2502 EN - 11/2017
To Next Page
Loading...
Need help?
General
