7 Special equipment
Mirror and lighting module
• One of the barriers is opened
• The foot switch and the drive operating lever
is actuated
• The main lift function is selec
ted
• The truck is not in an aisle
NOTE
If the truck is in an aisle and one of the two
barriers is opened and then closed again, the
tilt barrier is locked. It is unlocked again if the
foot switch is briefly actuated once and the
remaining conditions are fulfilled for it to be
unlocked.
Mirror and lighting module
If an industrial truck is equipped with this
module, additional operating instructions
are supplied ex works. These instructions
describe in detail how to assemble and
configure the module.
This module can be supplied in various
versions and combinations:
• As LED workplace lighting for illuminating
the racking next to the industrial truck
• With an integrated fan motor for circulating
air in the driver's compartment
• With an integrated parabolic mirror as a
rear-view mirror
CAUTION
Risk of accident
The curvature of the mirror surface significantly
increases the field of vision. As a result, objects
appear further away than they actually are.
Adjusting the mirror
The mirror can be
moved into the required
position by pu
shing on the corresponding
places.
CAUTION
Risk of damage to property
The adjustment range is mechanically limited.
Pushing too hard on the mirror glass can cause
the glass to crack.
118
5231 804 2502 EN - 11/2017
To Next Page
Loading...
