4 Operation
Operating devices
Adjusting the driver's seat
WARNING
Risk of accident
Only apply settings in a stationary truck.
Adjusting the height of the driver's seat
Place body weight on driver's seat. Pull lever
(1) and move the driver's seat to the required
height by applying to it or removing pressure.
Release the lever.
Setting the driver's seat to the horizontal
position*
Pull the handle (2) and move the seat into
the required position. The mechanism must
noticeably engage.
Tilting the seat surface
Pull handle (3) and move the seat surface into
the required tilt position. The mechanism must
noticeably engage.
Folding the driver's seat away
If the driver's seat is disruptive when operating
the truck in a standing position, it can be folded
up and away (4). The folded-up seat surface
is upholstered and can therefore be used for
leaning on.
60 5
231 804 2502 EN - 11/2017