Special equipment 7
Trucks for use in cold storage
Switching on the fan
Press the corresponding push button on the
operating panel.
NOTE
Switch to fan level 2 using switch (1). A blind
plugs (2) is fitted on the other side of the fan.
Switching on workplace lighting
Press the corresponding push button on the
operating panel.
Trucks for use in cold storage
Trucks for use in cold storage are provided
with extensive extra equipment, in order to
guarantee full functioning at low temperatures
(-30°C). Special instructions for the operation
of these trucks must be observed, which
are not contained in this operating manual
Trucks designed for operation in refrigerated
environments are marked with the adjacent
symbol.
CAUTION
Icy floors
Icy floors have a very negative effect on steering
and braking behaviour. In extreme cases steering
and braking potential may be lost completely.
Therefore the aisles must be kept free of ice at
all times.
523
1 804 2502 EN - 11/2017 119
To Next Page
Loading...
Need help?
General
