Operation 4
Operating devices
Doors
The glass doors feature a recess on the inside
of the handle. Only this area of the handle may
be used to open and close the glass doors.
The glass doors feature a fold
ing hinge in the
centre. To open the door, the h
andle must be
pushed towards the centre o
f the cab at the
point shown. The door is clo
sed by performing
the action in the opposite d
irection.
DANGER
Risk of crushing
Only the area of the handle indicated may be used
to open and close the glass door.
WARNING
Risk of falling
When climbing in and out, it is important to note the
difference in height between the floor of the driver's
compartment and the ground.
NOTE
The glass doors are monitored by electrical
means. The industrial truck is only ready for
operation when the doors have been correctly
closed.
Operating devices
Initial driving exercises
WARNING
Before starting work, the Checklist before starting
work must be completed.
Observe all safety instructions.
Speeds
The driver must adapt the driving speed
according to the situation. When cornering
in particular, attention must be paid to the
overall height and the centre of gravity, which
will be high as a result.
523
1 804 2502 EN - 11/2017 57