4 Operation
Operating devices
Initial driving exercises
WARNING
Risk of accidents
In order to become familiarised with the driving
and braking characteristics of these trucks, driving
exercises must first be carried out in a flat, obstacle-
free area of the warehouse.
Switchingonthecontroller
Plug in the battery male connector.
To do this, open the flap behind the lift mast.
Get into the cab and close the barriers/cab
doors.
NOTE
Barriers/cab doors
are monitored by monito-
ring switches to ens
ure that they are comple-
tely and correctly c
losed.
WARNING
Neverclimbontoorjumpontoamovingtruck
Unlock the emergency off switch by turning it
clockwise.
Switch on the key switch or activate the
electronic access control.
NOTE
Optionally, these trucks can also be equipped
with an electronic access control (PIN code,
RFID chip, magnetic card system). See also
the section entitled "Special equipment".
If the truck is in an error-free state, the working
spotlights* will now light up and the indicator
for normal operation appears on the operation
status display (see also the keyword "opera-
tion status display").
NOTE
After switching on, and each time the barriers
are opened, the foot switch must be pressed
again once to enable the functions. This
switching ensures that the truck can only be
operated if the operator is in the closed cab.
58 5
231 804 2502 EN - 11/2017
To Next Page
Loading...
