5 Regular care and maintenance
Regular maintenance
Replacement interval for lifting chains
CAUTION
Risk of accidents
The main lift chains and the auxiliary lift chain must
be replaced when the wear limit is reached or if
impermissible damage is present. The technical
condition of the chains from a safety perspective
must be assessed by a competent person using
the manufacturer's documentation. Observe the
current applicable guidelines for the cold store
version of industrial trucks.
Regular maintenance
Maintenance work as required
Go through the checklist before starting work.
Keep the industrial truck clean and dry.
If damage becomes apparent on the industrial truck, have it repaired without delay.
Perform checks on the industrial truck after changes and damage.
Investigate any changes in the noise on the industrial truck.
Perform battery maintenance in accordance with the manufacturer's instructions.
.
Maintenanc
e schedule
At operating hours
1000 h 2000 h 3000 h 4000 h 5000 h
Carried out
6000 h 7000 h 8000 h 9000 h 10000 h
Preparatory tasks
Clean t
he industrial truck or have it cleaned by the operating company.
Namepl
ate: identify the industrial truck.
Contr
oller: read out the operating hours.
Gearbox
Gear
box: check for noise and leakages.
Gear
box: check the oil level, top it up if necessary.
Gearbox: first oil change after 1000 operating hours and every 4000 operating hours
thereafter.
88 5
231 804 2502 EN - 11/2017
To Next Page
Loading...
Need help?
General
