Regular care and maintenance 5
Regular care and maintenance
Maintenance
In contrast, maintenance work must be
performed only by appropriately trained
personnel. Special tools and the current
service software are required. Therefore,
these activities are described only briefly in
the maintenance schedule.
Original parts
We recommend that you use on
ly genuine
spare parts. More informat
ion and the order
numbers can be found in the s
pare parts list.
The installation of other p
arts will invalidate
the warranty.
Maintenance frequencie
sandtimes
The maintenance activities are scheduled
at intervals of 1000 hours or 12 months.
You can use the maintenance schedule
to determine what work is required. The
following maintenance schedules are based
on 10,000 operating hours. Once this number
of operating hours is reached, the cycle starts
again from the beginning. The intervals must
be reduced for trucks exposed to high levels of
dust and significant temperature fluctuations.
A check of the function and condition of
the truck must be carried out during each
maintenance operation.
Type of stress
This maintenance schedule is valid for normal
stress for single-shift operation not within a
cold store. For heavy-duty and/or multi-shift
operation, reduce the intervals. Note the
information in the section entitled Area of
application.
523
1 804 2502 EN - 11/2017 87
To Next Page
Loading...
Need help?
General
