Still MX-X Original Instructions

Operation 4
Daily commissioning
Daily commissioning
Checklist before starting work
Before starting work, the driver must make
surethatthetruckisinasafeoperating
condition.
CAUTION
If any defects that could influence operational and
road safety are found during the daily pre-shift
check, a course of action must be taken immedia-
tely to ensure that appropriate repairs are carried
out. It is prohibited to continue operating the truck
until repairs have been performed.
Function checking the brake system
– Check the brake function after releasing the
foot switch.
– Examine the area around the foot switch for
foreign objects.
– Check the brake function after activating
the emergency off switch.
– Check the function of the reverse brake.
The braking and subsequent acceleration
processes must be gentle and not subject
to jerky movements.
– Check the "end of aisle automatic braking"*
system function.
– Perform further order-related brake function
checks.
Function checking the steering system
– Check that the steering turns freely.
– Check that the maximum steering angle of
approx. 90° to the left and right is achieved.
Checking all operating devices
– Check that the levers and push buttons are
in good working order.
– Check that all operating levers and push-
buttons return automatically to the neutral
position.
– Check that all the operating devices are in
good condition.
– Check that all the operating devices are
operating correctly.
Checking the access control
– Check that the switch key can be pulled out
when it is in the 0 position.
– Check that the industrial t
ruck cannot be
operated when the switch ke
y is removed.
– If electronic access control* is fitted: check
for correct function.
Checking the lifting accessory
– Visually check the forks f
or cracks.
– Visually check the forks for deformation.
– Check the function of the fork safety de-
vice*.
– Check that the locking p
in moves easily and
latches automatically
.
– Visually check the fork carriage for defor-
mation.
–
– Visually check the loa
d chains for damage.
Checking the overhead guard
– Visually check the overhead guard for
deformation.
– Visually check the o
verhead guard cover*
for condition and co
ntamination.
Checking the wheels
– Examine the wheels for foreign objects.
– Check the conditio
n of the drive wheel and
load wheels.
Checking the cab doors, the barriers and the
emergency off switch
– Make sure that when the emergency off
switch is actuated, neither the traction nor
any hydraulic function can be activated.
– Make sure that whe
n the barrier or cab
door* is open nei
ther the traction nor any
hydraulic funct
ion can be activated.
523
1 804 2502 EN - 11/2017 55

Still MX-X Specifications

General

Brand	Still
Model	MX-X
Category	Forklifts
Language	English