Operation 4
General commissioning
structures, suitable battery chargers must be
used.
NOTE
Batteries are subject to special charging,
maintenance and handling instructions.
Observe the instructions from the respective
manufacturer.
WARNING
Risk to life
Lithium-ion batteries m
ay only be used in industrial
trucks that have a design
and a controller intended
for use with such batter
ies. Check with the au-
thorised service par
tner before using a lithium-ion
battery.
CAUTION
Risk of damage to property
Incorrect battery chargers can cause total battery
failure.
Start-up
If your industrial truck is equipped with a Euro
battery plug, make sure that the voltage index
pin is in the correct position. The set voltage
can be read through a display window (1).
WARNING
Risk of accident
Risk of injury from crushing and shearing points
WARNING
Risk of short circuit
Do not clamp or crush battery cables.
Before starting each shift, check that the
battery lock is in good working order and that it
functions correctly.
Before using the battery for the first time,
a proper commissioning procedure must
be performed. If the battery was obtained
523
1 804 2502 EN - 11/2017 51
To Next Page
Loading...
