Operation 4
General commissioning
1 Attachment
2 Driver's cab incl. carriage
3Liftmast
4Battery
5 Chassis
Delivery in units
Specified weights apply only to the standard
design. Determine or request the weights of
special designs.
Narrow aisle trucks can be di
sassembled
into the following units: at
tachment, driver's
cab including carriage, l
ift mast, battery and
chassis.
When assemblies comprised of multiple
complete units are transported, the weights
of the individual units must be added together
so that a suitable hoist can be selected. When
hooking on the units, ensure that the overall
centre of gravity can be moved relative to the
individual units.
Weight of the attachment
A standard attachment (europallet) with a
turret head weighs approximately 800 kg.
If another attachment
is fitted, determine the
weight of the additio
nal attachment, e.g. by
weighing the attachm
ent.
Weight of the driver'
scab
A standard driver's cab including carriage
weighs approximately 660 kg. Take into
account the additional weight of attachments,
for example the weight of order-picking
platforms.
A standard cold store cab including carriage
weighs approximately 800 kg.
If another driver's ca
b is fitted, determine the
weight of the addition
al driver's cab, e.g. by
weighing the driver's ca
b.
Weight of the lift mas
t
The weight of the lift mast depends on its
design and overall height. The following
table shows the expected maximum weights
depending on the overall height.
Overall mast height
Weight
<3 m
<1600 kg
<4 m
<2,300 kg
523
1 804 2502 EN - 11/2017 41
To Next Page
Loading...
