Operation 4
Driving
the rail guidance, the new mode of operation
is automatically selected:
Exiting the aisle
The truck is to be driven completely out of
the aisle. The sensor system for the aisle
detection recognises the truck's location and
re-enables the steering.
Changing the aisle
If the truck is to be drive
n out of one aisle
and into another, the fol
lowing notes must be
observed:
– Drive the truck completely out of the aisle.
– Drive out of the aisle slowly and beware of
any people or other trucks in the transfer
aisle.
– Once the truck is outsi
de the rail, the
steering is reactivat
ed by the rail switch.
The truck can now be tu
rned 90° on the spot
and then driven to the
target aisle.
523
1 804 2502 EN - 11/2017 69
To Next Page
Loading...
Need help?
General
