Sun Microsystems Sun Fire X4100 - Page 246

F-16 Sun Fire X4100/X4100 M2 and X4200/X4200 M2 Servers Service Manual • August 2009
********************************************************************************
* Device Verify -- SAS1064 *
* *
* Device Identifier SEAGATE ST936701LSUN36G 0456 *
* SAS Address 5000C500:001047C9 *
* Serial Number 39000SZC 3LC *
* *
* All sectors on the device will be verified. *
* Press Enter to continue or any other key to cancel. *
* *
* *
* *
* Elapsed Time: 00:00:00 *
* *
* Percent *
* Complete 0% 100% *
* ************************************************** *
* * * *
* ************************************************** *
* *
* Esc=Exit F1=Help Alt+M=More Keys *
********************************************************************************
If the Logical Block Addresses (LBAs) can be reassigned, or need to be reassigned,
the following prompt appears:
Reassign the block?
(Yes, No, All, nonE, Cancel)
The reassignment options are as follows:
■ Yes: Reassign only this block. If another block needs to be reassigned in the future,
display the prompt again.
■ No: Do not reassign this block. If another block needs to be reassigned in the
future, display the prompt again.
TABLE F-7 Device Verify Screen Field Descriptions
Field Description
Device Identifier The ASCII device identifier string extracted from the device’s inquiry
data.
SAS Address The SAS address of this device.
Serial Number The serial number of this device.
Elapsed Time The total time elapsed since the Format or Verify operation started.
Percent Complete Graphical status bar that shows the current completion status of the
operation.