Sunrise Internet Box User Manual
Click on the ON/OFF button to activate or deactivate the DECT function
on your Sunrise Internet Box.
In the welcome screen, the status of the DECT is indicated with the 2
following icons:
: DECT on.
: DECT off.
Note: The steady "DECT" LED on the front of the Sunrise Internet Box
shows that the wireless network (Wi-Fi) is activated.
Status of the DECT connection.
Below, the number of connected handsets is displayed.
The Start Pairing button allows you to put the DECT base into pairing
mode.
Note: The pairing mode can also be started by a long press (more than
2s) on the DECT button located on the top of the Sunrise
Internet Box.
The Paging button allows you to perform a search when you have lost a
handset.
Note: The paging mode can also be started by a short press (less than
2s) on the DECT button located on the top of the Sunrise
Internet Box.
To Next Page
Loading...
