Sunrise Internet Box - Port Triggering

Page 60
Sunrise Internet Box User Manual
3.4.3 Port Triggering
Objective: The purpose of this menu is to dynamically open the firewall ports (open ports) via "Trigger
Ports" when an application (such as a game or video) opens a connection via the transport layer
(TCP or UDP).
• In the Access Control menu, select Port Triggering.
The following screen opens:
Field
Meaning
Service Name
Application name.
Trigger
• Protocol: Transport protocol (TCP or UDP).
• Port Range: A port range contains a Start port (From) and an End
port (To).
Note: A single port is characterised by an identical start port and end port.
Open
• Protocol: Transport protocol (TCP or UDP)
• Port Range: A port range contains a Start port (From) and an End
port (To).
Note: A single port is characteried by an identical start port and end port.