7.0 SG-DRL5/DRL5E/DRL5-2L PSTN Line Cards
- 115 -
SG-DRL5 Option 178/278: Max Inter-digit
Default (00)
Certain old dialers may have difficulties in communicating with the line cards. The receiver provides a possible solution by programming this option.
This option should be left as a default and should be changed only on the recommendation of a Sur-Gard technician. When programmed as 00, the inter-
digit time is determined by the Baud rate of the format being used; all other values are in 100 ms. intervals.
00 Automatically determine inter-digit by baud rate (Default)
01 100 ms
02 200 ms
..... .....
0A 1000 ms
..... .....
FF 25000 ms
NOTE: Although this section allows all entries from 00-FF it is not recommended to program this section with a time that exceeds 3000mS
(1E Hex).
SG-DRL5 Option 179/279: Max Inter-burst
Default (00)
Certain old dialers may have difficulties in communicating with the line cards. The receiver provides the possible solution by programming this option.
This option should be left as default and should be changed only on the recommendation of a Sur-Gard technician. When programmed as 00, the inter-
burst has a time of 100 ms, all other values are in 10 ms increments.
00 100 ms (default)
01 10 ms
02 20 ms... and so on
SG-DRL5 Option 17A/27A: 4 and 5 Digit Account Codes to Activate 2-Way Audio
Default (00)
This option determines which account codes are able to activate the 2-way audio feature. Program the first digits of the desired account codes in Option
17A/27A.
For example:
To allow all account codes between 1000 and 2FFF to activate the 2-way audio function, program Option 17A/27A as '12'.
To allow all account codes between 3000 and 6FFF to activate the 2-way audio function, program Option 17A/27A as '36'.
To disable the 2-way audio function, program Option 17A/27A as '00'.
NOTE: The Audio Time Option 104/204 or Hook Flash Option 111/211 must be enabled to activate the 2-Way Audio feature of the line
card.
NOTE: Option 17A/27A may be used with any formats supported by the receiver.
For UL Listed products, the permitted setting is 00.
SG-DRL5 Option 17B/27B: 3-Digit Account Codes to Activate 2-Way Audio
Default (00)
This option determines which 3-digit account codes are able to activate the 2-way audio feature. Program the first digits of the desired account codes in
Option 17B/27B.
For example:
To allow all 3-digit account codes between 200 and 3FF to activate the 2-way audio function, program Option 17B/27B as '23'.
To allow all 3-digit account codes between 300 and 6FF to activate the 2-way audio function, program Option 17B/27B as '36'.
NOTE: The Audio Time Option 104/204 or Hook Flash Option 111/211 must be enabled to activate the 2-Way Audio feature of the line
card.
NOTE: Option 17B/27B may be used with any 3-digit account code formats supported by the SG-System IV.
For UL Listed products, the permitted setting is 00.
SG-DRL5 Option 17C/27C: Audio Alarm Code Range
Default (00)
This option determines the range of alarm codes, which activates the 2-way audio function. Program the first digit of the desired alarm codes in Option
17C/27C.
For example:
The receiver initiates audio by the account range, Options 17A/27A and 17B/27B or by Option 17C/27C ALARM CODE or by both.
If all alarm codes beginning with 6, 7 and 8 are to activate 2-way audio, program Option 17C/27C as '68'. Option 17C/27C may be used with 10 to 40
Baud formats, DTMF 4/1, 4/2, 4/3 and Contact ID formats.
To Next Page
Loading...
