Suzuki DL650K5 - Page 76

3-22 ENGINE
• Remove the spring holder bolt

2, spring and gasket.
• Remove the cam chain tension adjuster

3.
• Remove the intake camshaft journal holder

4.
• Remove the exhaust camshaft journal holder

5.
NOTE:
Mark the cylinder location as “F” to the camshaft journal holders.
• Remove the dowel pins

6.
• Remove the intake camshaft

7.
• Remove the exhaust camshaft

8.
NOTE:
Do not drop the dowel pins into the crankcase.
FRONT CYLINDER HEAD
• Remove the cylinder head bolt (M6)

1.
• Remove the cylinder head bolts (M6)

2.
• Remove the cylinder head bolts

3 and washers.
NOTE:
When loosening the cylinder head bolts, loosen each bolt little
by little diagonally.
• Remove the cylinder head

4.
PartShark.com
877-999-5686