118
ENGINE REMOVAL
This section covers the removal of the Suzuki 660 engine
from the Model 898487 On–road Cushman Police
Vehicle. The engine and transmission are to be removed
from the vehicle as an assembly.
Procedure
1. Disconnect negative (–) and positive cables from
battery terminals.
ECM
2. Remove transmission access cover.
3. Remove ECM cover located underneath middle sec-
tion of storage compartment. Disconnect ECM
plugs.
4. Remove engine cover with seat and left hand side
panel.
5. Disconnect lead wires and positive (+) battery cable
from starting motor.
6. Disconnect negative (–) battery cable and wiring har-
ness ground wires from transmission.
7. Disconnect all wiring harness electrical quick discon-
nects from transmission.
To Next Page
Loading...
