119
8. Disconnect lead wires from water temperature
sender.
9. Remove air cleaner hose.
10. Remove fuel tank cap to release fuel vapor pressure
in fuel tank and then reinstall it.
FUEL LINE
VACUUM LINE
11. Disconnect vacuum and fuel lines.
12. Disconnect lead wires from alternator terminals.
ACCELERATOR CABLE
SPEED LIMITER
CABLE
13. Disconnect accelerator cable and speed limiter
cable.
CONTROL CABLE
14. Disconnect gear shift control cable from transmis-
sion.
15. Raise the vehicle. Refer to the chassis service
manual for jacking procedures.
To Next Page
Loading...
