COOLING
AND
LUBRICATION
SYSTEM
6-19
lnstall the impeller shaft to the water pump body.
Install the water pump body w~th the impeller to the clutch
cover.
.
.>Y
Install the washer
!;I),
pin
61,
water pump driven gear
(61
and
snap ring
(71.
09900-061 07:
Snap ring pliers
Apply engne coolant to the O-ring.
lnstall the O-ring to the water pump cover.
-
c
AU~
-.
The removed O-ring
must
be replaced
with
a new one.
lnstall the water pump cover
to the right crankcase cover.
lnstall the right crankcase cover.
(p3-70)
lnstall the clutch cover.
(m3-70)
lnstall the right oil tank hose.
(U6-23)
*
lnstall the brake pedal
(-7-67)
and rear brake switch.
Connect the breather hose and radiator hose.
Pour engine oil.
(-2-13)
Pour engine coolant.
(W2-15)
Adjust the brake pedal.
(W2-19)
*
Adjust the rear brake switch.
(-2-19)
To Next Page
Loading...
