CHASSIS
7-17
NOTE:
Check the "rim line" cast on the lire side walls.
It
must be
equidistant from the wheel
rim all the way around.
If
the distance
between the rim line and the wheel rim varies this indicates that
the bead is notproperly seated.
If
this is so, deflate the tire com-
pletely, and unseat the tire bead on both sides. Then, coat the
bead with clean water, and re-seat the tire.
Adjust
the tire
pressure
to
the
spec~f~cat~on.
(-2-24)
puTJ0q
Before inflating the tire, check the MAXIMUM
OPER-
ATING
PRESSURE
rating of the tire. This is indicated
following the tire size shown on the sidewall.
The number of
"f.
"
on the tire indicates the maximum
operating pressure.
Maximum operating pressure
.i"i>',:.:k:
45
kPa
(0.45
kgflcm2,
6.5 psi)
To Next Page
Loading...
