2-14
PERIODIC MAINTENANCE
*
install the new 0-rlng
(3'.
----
-
install the spring
'.Zj
and new O-ring
(5).
t.
.~
.+
pmiGi
.F*,
.
Apply engine oil to the O-rings.
Replace the oil filter cap and tighten the bolts securely.
NOTE:
Face the triangle
mark
[A')
on the
cap
rearward.
l<
Add
new engine oil and check the oil level as described in the
engine oil replacement procedure.
m-
Engine oil capacity (oil tank side)
c-
~-
<~J
yY
Oil change: 1.2
L
(1.3
US
qt, 1.1 Imp qt)
!.Id
Oil and filter change: 1.3
L
(1.4
US
qt, 1.1 imp qt)
43
Engine overhaul: 1.4
L
(1.5
US
qt, 1.2 imp qt)
@-~~~
,
I
,
.O
Engine oil capacity (engine side)
,
.
Oil change:
0.4
L
(0.4
US
qt, 0.4 imp qt)
Oil and filter change: 0.4
L
(0.4
US
qt, 0.4 Imp qt)
I
I
Engine overhaul: 0.4
L
(0.4
US
qt, 0.4 imp qt)
When reassembling the oil filter, make sure that the oil
filter is installed as shown above. If the filter is
Installed improperly, serious engine damage may
result.
ENGINE
OIL
HOSE
lnspect initially at 1 month and every
3
months there-
after.
rL
-
i
.,
Inspect the engine oil hoses for damage and oil leakage.
If
any
&.-4,,
,,,,-
delects are found, replace the engine oil hoses with new ones.
m
.
~
>
To Next Page
Loading...
