ELECTRICAL
SYSTEM
8-25
FUEL LEVEL SWITCH INSPECTION
Remove the fuel tank cover.
(C-7-6)
&.-
0
Disconnect the fuel eve coupler
81
and remove the fuel level
\
+
-*\
switch cap
(21.
6
0
'
.
.
Remove the fuel level switch
(31.
.>
../>
'4.-.
.
'
i
''
.
.
k
.'
;~
C-
C
Connect 12
V
battery and test bulb
(12
V,
3.4
W) to the fuel
level indicator switch as shown in the right illustrations. The
bulb should come on after several seconds if the switch is in
good condition.
bulb
When the switch is immersed in kerosine under the above
condition, the bulb should go out.
If
the bulb remains it,
replace the switch with a new one.
FUEL LEVEL INDICATOR LIGHT INSPECTION
Check that the indicator lhghts immediately after turnina the iani-
-
tion switch
ON.
if the fuel level indicator light does not light up, check the cou-
plers, wires and bulb.
NOTE:
When ignition switch is turned on, fuel level indicator light is lit
for
2
seconds and thereafter remains unlit
To Next Page
Loading...
