Chapter 5 Command Reference
Description of SCPI Commands
94 Operating and Programming Manual
STATus:QUEStionable:ENABle?
This query reports the contents of the QUEStionable enable register, non
destructively.
Response format = <NR1>
STATus:QUEStionable:NTRansition <numeric_value>
This command sets the negative transition filter (fall register) as specified.
Meaningful values are in the range 0 to 32767.
STATus:QUEStionable:NTRansition?
This query reports the contents of the fall register.
Response format = <NR1>.
STATus:QUEStionable:PTRansition <numeric_value>
This command sets the positive transition filter (rise register) as specified.
Meaningful values are in the range 0 to 32767.
STATus:QUEStionable:PTRansition?
This query reports the contents of the rise register.
Response format = <NR1>.
STATus:PRESet
This command clears the OPER and QUES enable registers, sets the rise registers,
and clears the fall registers.
To Next Page
Loading...
