Symmetricom 5071A - SCPI Command Conformance

Chapter 4 Remote Operation and Programming
SCPI Command Conformance
Operating and Programming Manual 49
SCPI Command Conformance
The SCPI commands used in the 5071A are in conformance with the SCPI
Standard Version 1990.0. The instruments SCPI command set consists of the
following:
• Common Commands as defined in IEEE 488.2 - 1987.
• Subsystem commands as confirmed (and listed) in the SCPI standard. These
are commands defined in table 5-2 as Std.
• Subsystem commands designated for the instrument in conformance with
SCPI standards but not yet listed in the SCPI standard. These are the
commands defined in table 5-2 as New.