Safety Considerations and Warranty
ii Operating and Programming Manual
©Copyright Symmetricom, Inc. 2005
All Rights Reserved. Reproduction,
adaptation, or translations without
prior written permission is prohibited,
except as allowed under the
copyright laws.
Manual part number
05071-90041
Safety Considerations
General
This product and related documentation must be reviewed for familiarization with this
safety markings and instructions before operation.
This product is a safety Class I instrument (provided with a protective earth terminal).
If this instrument is used in a manner not specified by Symmetricom, the protection
provided by the equipment may be impaired.
Before Applying Power
Verify that the product is set to match the available line voltage and the correct fuse is
installed. Refer to instructions in Chapter 1 of this Manual.
Before Cleaning
Disconnect the product from operating power before cleaning. Clean only with lightly
damp cloth and mild detergents. Do not get unit wet.
Safety Earth Ground
An uninterruptible safety earth ground is recommended from the mains power source to
the product input wiring terminals or supplied power cable. The terminal is located on
the rear of the unit near the AC input receptacle.
Warning Symbols That May Be Used In This Manual
Instruction manual symbol; the product will be marked with this
symbol when it is necessary for the user to refer to the
instruction manual.
Indicates hazardous voltages.
Indicates earth (ground) terminal.
To Next Page
Loading...
Need help?
General
