Symmetricom 5071A User Manual

Chapter 7 Installation
Returning the 5071A to Symmetricom
124 Operating and Programming Manual
Returning the 5071A to Symmetricom
The following paragraphs provide information to properly package and
ship the 5071A.
When packing has been completed:
• Mark the shipping container as FRAGILE to ensure careful handling, and
• In any correspondence, refer to the contents by both the product model (or
part) number and the product‘s full serial number.
If the original packing materials are not available, obtain a 59991-
91105 Packing kit, which consists of the items listed in Table 7-2.
Table 7-2. Contents of 59991-91105 Packing Kit
Part
Number
Quantity
Description
Callout
9220-4915
2
Tube, Corrugated
1
9211-6672
1
Tray
2
9220-4972
2
Insert
3 and 7
5040-6967
8
Pad, foam-corner
4 and 8
5040-6968
1
Plastic Cap
5
9220-4914
1
Insert
6
9211-6671
1
Carton, corrugated cardboard
9
None
As Req'd
Reinforced packing tape
N/A
None
As Req'd
Staples
N/A
Perform the following steps to package the 5071A for shipment:
1 Pack the instrument as shown in Figure 7-2, on the next page, using the
instructions provided with the packing kit. (You do not need to return the manual
and power cord.):
2 After you‘ve finished packing the instrument in the inner corrugated carton, refer
to the 5071A shipping web site for any other labeling or markings instructions.
Overpack may not be required in some areas. The web site is
http://www.symmttm.com/5071A/Shipping/
3 Ensure that all labels are attached and instructions provided with the packing kit
have been completed.

Symmetricom 5071A Specifications

General

Brand	Symmetricom
Model	5071A
Category	Measuring Instruments
Language	English