Symmetricom 5071A - Page 37

Chapter 1 Getting Started
Starting the 5071A
Operating and Programming Manual 9
The 5071A will power up at shipment receipt with the following configuration:
Output Ports
RS-232C
System Logs
If the application requires a different configuration, please refer to
page 26 in this manual.
* 1 entry remains: "Power source is BATT"
For 48V option
* 1 entry remains: ―Lock completed‖
Port1
5 MHz output
Port2
10 MHz output
Baud rate
2400
Data bits
8
Parity
none
Stop bits
1
Printer log
disabled
Error log
cleared*
NOTE