Chapter 5 Command Reference
Sample Program Commands
58 Operating and Programming Manual
Example Program 3 — Leap Second Insertion
Program Dialog Task Function
SOUR:PTIM:LEAP:MJD 48621 Set date of leap second.
scpi >
SOUR:PTIM:LEAP:DUR 59 Set time (show minute).
scpi >
SOUR:PTIM:LEAP ON Enable Leap second insertion.
scpi >
Example Program 4 — Steering the Outputs
Program Dialog Task Function
SOUR:ROSC:STE -1.23E-13 Steer all outputs with a fractional
scpi > offset of -1.23 x 10
-13
.
Example Program 5 — Slewing the Clock
Program Dialog Task Function
SOUR:PTIM:SLEW 0.5 Adjust epoch: add one-half second.
scpi >
To Next Page
Loading...
