Tadiran Telecom FlexSet 280D - Headset Only

Headset Only 84 FlexSet 120/280 User Guide
Display Message Key LED
Headset Only #1302
The feature is designed for users operating in headset mode. It is of particular
value at information centers where the headset option is the most efficient way
of communication. When activated, the Headset Only feature causes calls to be
conducted via the headset and disables the FlexSet’s microphone and
loudspeaker, along with the features that use these devices, e.g. background
music, voice page, etc. Calls are conducted via the headset even if the cradle
switch is on-hook, enabling a user to make full use of the hands-free operation.

Note: 1) When utilizing Headset Only feature, the SPKR key should be
programmed as an ON/OFF (connect/release) key. See your
system administrator.
2) Refer to page 167, for instructions on operating a FlexSet
programmed as Headset Only.
To activate Headset Only:
1. Dial Headset Only feature code #1302 followed by activation code , HDSET ONLY OFF
OFF
or press [HEADSET ONLY]. HDSET ONLY ON
ON
To disable Headset Only:
1. Dial Headset Only feature code #1302 followed by cancellation code , HDSET ONLY ON
ON
or press the lit [HEADSET ONLY]. HDSET ONLY OFF
OFF