Speed Dialing: Programming Private Library 168 FlexSet 120/280 User Guide
Display Message Key LED
Speed Dialing: Programming Private Library #193
You may be allowed to program or update your telephone with your own
private (personal) Speed Dial directory. This directory of speed dial numbers
can be accessed only at your station line.
To program or change a Speed Dial number:
1. Dial PRIVATE SPEED CALL feature code #193. PRIVAT LIBRARIES
ON
2. Dial the relevant Library Number (70007009) or PRIVAT LIB
aaaaa
3. Scroll through the library by pressing the or ,
then
PRIVAT LIB
aaaaa
xxxxx
4. Dial the outside line access code.
or
Press a programmed outside line feature key.
Possible outside line access codes are: trunk number, trunk group number, dial
service, routing access, or another public/private library number.
1. Dial the outside telephone number (use special codes shown in table on
page 170).
PRIVAT LIB
aaaaa
xxxxx dddddddddd
2. Press [SPKR] to release or continue scrolling with the volume keys.
Note: A new number programmed into a previously defined private library
number will replace the old number.
x = Outside line access code
a = Library number
d = Outside telephone number
To Next Page
Loading...
