Series Call 159 FlexSet 120/280 User Guide
Display Message Key LED
Series Call #195
The system allows you to mark an external call before you transfer to a third
party. This causes the call to return to you after the third party hangs up. A
Series Call can only be marked while engaged in conversation.
To mark a call as a Series Call:
1. Press [SERIES]
or
Press
[XFER]* and dial Series Call code #195.
2. Listen for the confirmation tone.
3. Continue with the call or transfer as required.
RECONNECT (
calling
#)
4. Press [SPKR] or hang up to release.
Transferring the call is made as usual. However, the marked call will now
return to you when the third party hangs up.
Note: Marking a call that has already been marked displays the ALREADY
SET message.
To Next Page
Loading...
