Break-In 33 FlexSet 120/280 User Guide
Display Message Key LED
Break-In Xfer 3, #124
This feature enables an authorized user to break into an established two-party
call.
To break into a busy destination:
1. Press [BREAK IN]. BUSY
xxxxx
or
Press
[XFER] and dial Break-In code 3. B TO
yyyyy xxxxx
Both conversing parties will hear the Break-In warning tone.
To release Break-In (Break-Out):
1. Press [SPKR] or hang up.
Note: To program a [BREAK-IN] key, use feature code #124.
To Next Page
Loading...
