Idle Display - On/Off 91 FlexSet 120/280 User Guide
Display Message Key LED
Idle Display - On/Off #137
When in idle mode, the first line of the display shows the time, date and site
name and the second line indicates the name and station number where defined
system-wide. You can switch the idle display on or off.
To cancel Idle Display:
1. Press the lit [IDLE DISPLAY] or dial Idle Display code #137. IDLE DISP. ON
ON
2. Dial cancellation code . IDLE DISP. OFF
OFF
3. Listen for the confirmation tone. display goes blank
To return Idle Display
1. Press [IDLE DISPLAY] or dial Idle Display code #137. IDLE DISP. OFF
OFF
2. Dial activation code . IDLE DISP. ON
ON
3. Listen for the confirmation tone. display returns
hh:mm(am/pm) mm/dd/yyyy xxxx
user name (user#)
FlexSet 280D/
280D-Z
American Presentation of Date Display
hh:mm (am/pm) mm/dd/yyyy
user name (user#)
FlexSet 120D
hh:mm (am/pm) dd/mmm/yyyy xxxx
user name (user#)
FlexSet 280D/
280D-Z
European Presentation of Date Display
hh:mm (am/pm) dd/mmm/yyyy
user name (user#)
FlexSet 120D
xxxx - Site name, up to 20 characters
To Next Page
Loading...
