Boss Group: Using 30 FlexSet 120/280 User Guide
Display Message Key LED
Boss Group: Using
Making Calls:
1. Press a free [LINE -nn] key. OFF
2. Dial required number. ON
Note: The line key LED of all group members changes from off to steady
on.
Receiving Calls:
When line flashes and telephone rings or only line flashes:
xxxxx
CALL
bbbbb
FLASHING
1. Press the flashing [LINE -nn] key or, if phone rings, lift handset. ANSWER
xxxxx
ON
2. Answer the call.
Note: The line key LED of all group members changes from flashing to
steady on.
x = caller number or name (see page 149)
b = your Boss Group number or name
To join a group conversation:
You can join any group conversation when a line key is on. Except when the
member’s station is set to privacy, in which case the message
PRIVACY and a
reorder tone is heard. If another member has already joined the conversation, then
you receive the message
ILLEGAL and a reorder tone is heard.
1. Press the lit [LINE-nn] key. B TO
yyyyy xxxxx
ON
Both conversing parties will hear the Break-In warning tone.
To Next Page
Loading...
