Message: Answering 109 FlexSet 120/280 User Guide
Display Message Key LED
To manually receive your message:
1. Press the lit [MESSAGE] key or dial feature code #175. call back message: CALL
xxxxx
ON
2. Pressing either or allows scrolling
through the message list. attendant message
ATT MSG
xxxxx
ON
waiting:
then either
To obtain the message left by the attendant or another station:
1. Dial activation code
. INTERNAL
xxxxx
ON
2. Listen for the ringback tone.
3. Wait for the answer
or
To cancel a call back message left by another station:
1. Dial cancellation code
(no confirmation tone will be heard).
2. Press
[SPKR].
Note: When the FlexSet is not equipped with a display module, the MSG key
should be programmed with #175 followed by activation code
.
To Next Page
Loading...
