Auto Set Relocate: Temporary 23 FlexSet 120/280 User Guide
Display Message Key LED
To cancel from the destination (your new) location:
1. Press the lit [AUTO SET RELOCATE] or dial Auto Set Relocate feature code. RELOCATE
ENTER SOURCE NO. ON
2. Dial your (source) station number (the number that is now displayed at your
new location).
3. Dial your (source) station passcode (4 digits).
RELOCATE
ENTER PASSCODE ON
4. Dial cancellation code (no confirmation tone is heard). CONFIRM
ON
5. The station initializes with the source profile.
idle display of the
source number
OFF
To Next Page
Loading...
