Park 129 FlexSet 120/280 User Guide
Display Message Key LED
Park #183 or 79 or #7
Allows you to put a call on hold at one station, and pick it up at another station.
The party put on park can hear one of the following: music, reorder tone, busy
tone or no sound at all as defined system-wide.
To park a call:
1. Press [CALL PARK] CALL PARK
xxxxx
ON
or
Press
[XFER]* and dial Park Feature code #183. PARKED LINE
WINKING
2. Listen for the confirmation tone.
To pick up a parked call from another station:
1. Lift handset from any station.
2. Press
[CALL PARK] or any dial Park Feature code #183. CALL PARK
ON
3. Dial station number at which call was parked. DIAL
yyyyy
ON
4. Answer the call. ANSWER
xxxxx
OFF
To Next Page
Loading...
