Park 130 FlexSet 120/280 User Guide
Display Message Key LED
To pick up a parked call from same station where call is parked:
1. Press the winking key at which the call is being parked
or
Press
[CALL PARK] or dial Park Feature code #183.
2. Dial activation code
.
3. Answer the call.
Notes:
1) More than one call can be parked at a single station, but are
retrieved on a first-in, first-out basis (FIFO). That is, the first
parked call (first-in) will be the first call that is picked up (first-out).
However, if multi-parking is required, it is recommended that the
Page_Q feature be used instead (see page 120).
2) If the parked call is not picked up within a predetermined time, the
RECALL
xxxxx
FLASHING
call automatically returns to the originating station from which the
park was made.
3) Activation code
can be programmed into the key after feature
code #183.
To Next Page
Loading...
