Saved Number/Repeat Number 156 FlexSet 120/280 User Guide
Display Message Key LED
Saved Number/Repeat Number #196 or #9
An external number that you have dialed can be stored in memory and called
later. A number can be saved during a conversation or when you hear a busy
tone or when the dialed number is not answered.
To save a number:
1. Press [SAVED #] SAVE NUMBER
or
Press
[XFER]* and dial Saved Number feature code #196.
2. Listen for the confirmation tone.
RECONNECT (
trunk
#)
3. Continue with call or hang up.
To redial the Saved Number:
1. Press [SAVED #] SAVE NO.
(trunk #)
DIAL
dddddddddd
.
or
Dial Saved Number feature code #196.
Notes:
1) In some cases, as defined by Class of Service, the Saved Number
feature code must be followed by a Forced Account code. When
Forced Account code is required a distinctive dial tone will be
heard after dialing #196.
2) As opposed to Last Number Redial, the Saved Number will remain
in memory until another number is saved by repeating the above
procedure.
d = Outside telephone number
To Next Page
Loading...
