Passcode 131 FlexSet 120/280 User Guide
Display Message Key LED
Passcode #179
You can define a private unique passcode for your station set. The passcode
will allow you (if defined in your COS) to operate Phone Lock, Executive
Privilege, Auto Set Relocate, IRSS, or COS Switchover. The passcode can
easily be changed.
Defining a passcode for the first time or changing a passcode must be
performed from your own telephone. Passcodes consist of four digits.
CAUTION !
Once a passcode has been defined, the code is known only to you
and the system administrator. If you forget the passcode you will
not be able to utilize the features that require the code. Therefore,
write your passcode number in a secure place for future reference.
To enter a Passcode for the first time:
1. Press [PASSCODE] or dial feature code #179.
2. Dial your new passcode (4 digits).
ENTER NEW
PASSCODE
3. Redial your new passcode. REENTER
PASSCODE
4. Listen for the confirmation tone. PASSCODE CONFIRMED
To Next Page
Loading...
