Hot Line: Delayed 89 FlexSet 120/280 User Guide
Display Message Key LED
Hot Line: Delayed
Upon lifting your handset you will receive an internal dial tone. However, if
you do not dial a number within a system-wide defined time-out your
telephone will automatically be routed to a pre-defined destination. This
feature cannot be defined at your telephone, but is typically defined by the
attendant. In addition the attendant can cancel the feature or set up Hot Line
Delayed for other destinations.
To activate Hot Line Delayed (when defined at your telephone):
1. Lift handset or press [SPKR]. DIAL
2. Listen for the dial tone.
3. Wait for a certain period of time until the hot line destination rings.
HOT ST DEL
xxxxx
4. Wait for answer.
Note: During dial tone, you can dial the other number to override the
feature.
To Next Page
Loading...
