Individual Remote System Services (Freedom) - IRSS 100 FlexSet 120/280 User Guide
Display Message Key LED
To enable a new IRSS phone from your current IRSS phone:
Note: To enable the IRSS feature at your Coral station, you must first
program a Private/Public Library number with your off-site phone
number. Use table on page 92 to record Library numbers that contain
your IRSS destinations.
1. From your current IRSS phone, place a call to your Coral station:
• For a phone that provides Caller ID, repeat steps 1-4 on page 93.
• For a phone that does not provide Caller ID, repeat steps 1-4 on page 94.
2. Listen for the dial tone.
3. Dial IRSS feature code #17714.
4. Listen for the dial tone.
5. Dial a Private/Public Library number defined with your new off-site phone
number.
6. Listen for the reorder tone. You are now disconnected. You can now access
your station from your newly assigned IRSS phone.
To cancel the IRSS feature from an IRSS phone:
1. Repeat steps 1-4 above.
2. Dial cancellation code
.
3. Listen for a short burst of confirmation tone. IRSS is cancelled at your
station.
To Next Page
Loading...
