Waiting Calls Receiving 184-a FlexSet 120/280 User Guide
Display Message Key LED
All the following features are activated after the waiting call is answered. For
more information, see also “Broker/Consultation/3-Way Conference Call” on
page 34
.
To activate a Broker call:
1. Press [XFER] to alternate between parties (any number of times).
2. Then either
• Press [SPKR] or hang up in order to allow conversation between the two parties
or
• Press [FORCED RELEASE] to release all parties and press [SPKR].
To activate a Consultation call:
When your conversation is concluded, press [XFER] to return to the original
call (the consulted party is released).
To activate 3-Way call:
• Press [FORCED RELEASE] to release the third party and to return to original
call (same as consultation call)
or
• Press [XFER] to connect all three parties.
To activate combination of Broker/Consultation/3-Way Conference calls:
1. Press [XFER] to put the third party on hold.
2. When you have concluded your private conversation, press
[XFER] to
complete a 3-Way Conference Call.
To Next Page
Loading...
