Broker/Consultation/3-Way Conference Call 35 FlexSet 120/280 User Guide
Display Message Key LED
All the following features are activated during an established call:
To activate a Broker Call:
1. Press [XFER]*.
2. Dial the third party - wait for answer.
3. Press
[XFER] to alternate between parties (any number of times).
Then either
• Press [SPKR] or hang up in order to allow conversation between the two
parties.
or
• Press [FORCED RELEASE] to release all parties and press [SPKR].
To activate a Consultation Call:
1. Press [XFER]*.
2. Dial the number of the person you want to consult with, then when your
conversation is concluded
3. Press
[XFER] to return to the original call (the consulted party is released).
To Next Page
Loading...
