Camp-On: Call Back - Station, Outside Line 43 FlexSet 120/280 User Guide
Display Message Key LED
When your phone rings (required trunk now idle):
1. Answer the call/listen for the outside dial tone CAMP-CALL (
your
#)
CAMP-ON TO
xxxxx
FLASHING
or
Should you hear inside distinctive tone, (system-wide defined), press
ANSWER CAMP
[CAMP ON] or dial 2 to initiate outside call.
2. Dial required outside number (not required in Routing Access dialing).
OUTSIDE
xxxxx
To cancel Camp-On before you are called back:
1. Press the lit [CAMP ON] key or dial feature code #176.
2. Scroll with and stop at the destination you want to cancel.
CAMPING ON
xxxxx
ON
3. Dial cancellation code 8.
4. Listen for the confirmation tone if LIST EMPTY is displayed.
LIST EMPTY
OFF
5. Press [SPKR].
Notes:
1) If you have camped onto a number of destinations and your
FlexSet is not equipped with a display unit, do not scroll, the oldest
number camped on is cancelled. Cancelling camped on numbers
can continue throughout the list, with the next oldest
number then
cancelled each time.
2) If you try to camp again onto an already camped number, you
receive the error message: ALREADY SET.
3) To program a Camp On key, use access code #176.
4) Camp On is automatically cancelled after a system-wide defined period
after activation.
To Next Page
Loading...
